BendPak 10,000 lb 2 Post Extra Tall Clearfloor Drive On Car Lift XPR-10S-168

Description

Listing Template 2018
Home
About Us
Shipping
Returns
View Feedback
Contact Us
BendPak 10,000 lb 2 Post Extra Tall Clearfloor Drive On Car Lift XPR-10S-168
Auto Body Toolmart has been serving the Automotive Industry for over 30 years. Buy with confidence.
*FREE Shipping in Continental USA.
The BendPak XPR-10-168 gives the same exceptional direct-drive lifting performance and clearfloor convenience as with the standard XPR-10 but with an added 23" up on top. Fits in shops with ceilings higher than 14'.
The XPR-Series 2-Post lifts have an incredibly rapid lift speed. It offers other features to increase efficiency and productivity with lower operating expenses and higher productivity. BendPak has redesigned most of their two-post lifts to accept taller narrow fleet vehicles. All of the extended height models in the XPR-Series can easily lift some of the largest full-sized pickups and commercial vehicles but also provide specific capability for sport and compact cars, both foreign and domestic
The XPR-10-168 is a durable, close-top model lift with a 10,000 maximum lifting capacity. The dual-synchro equalization system is easy to use. All BendPak's extended height, clearfloor model lifts feature a dual "direct-drive" low-pressure cylinders that minimize leakage and reduce the workload placed on the entire hydraulic system. Some other features of the XPR series include: 16 individual maintenance-free UHMW load bearings, single-pierce columns, extra-tall lifting carriages and oversize 5" cable sheaves.
The XPR-Series lifts features the most advanced engineered technology available in the industry. The lifts are built to safety standards well above normal OSHA/ALI/ETL requirements.
XPR-10-168 comes with:
Direct-Drive Two-Post Car Lift Technology
BendPak two-post lifts feature low-pressure HVLP direct-drive cylinders eliminating the need for lifting chains or screw mechanisms most commonly found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and less maintenance costs throughout the life of your lift. High-volume, low-pressure equates to less workload placed on the entire hydraulic system. Direct-Drive technology is preferred on commercial-grade two post car lifts as it has fewer moving parts than a chain-over-roller cylinder configuration. Pressurized hydraulic fluid flows from the power-unit, through the hollow cylinder rods then enters the cylinder body and lift carriages. A dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.
30° Rotated Columns - XPR-10A-168 and XPR-10A-168-LP Only
The XPR-10A-168 and XPR-10A-168-LP feature 30° rotated columns for added clearance when opening vehicle doors. At the same time, swing-away arms provide a larger drive-thru clearance. These asymmetric models feature the exclusive Tru-Metric arm design to provide variable arm-position configurations - either symmetric or asymmetric, providing greater versatility for greater service capability. It's like two lifts in one.
Clearfloor Conveniece
The clearfloor models provide unobstructed floor space allowing technicians to easily move toolboxes, transmission jacks, oil drains and other equipment underneath the elevated vehicle
Triple-Telescoping Front Arms and Two-Stage Rear Arms
Increases overall arm positioning for lifting a variety of different wheel base vehicles. Overall arm sweep and minimum arm reach are also extended to precisely lift vehicles that have unibody construction, OEM recommended pick-up points and wide and/or narrow wheelbase configurations
Low-Profile, Dropped-End Frame Contact Pads
Squeeze under eve the lowests compact and sport vehicles
Included Truck and Van Adapters
Standard with every XPR-Series lift. Ideal for trucks and vans with running boards or auxiliary fuel tanks
Lowered Arm Tube Supports
To minimize the chance of damaging vehicles with low-hanging vehicle doors, the completely redesigned arm tube supports allow for better clearance
Automatic Arm Restraints
Each arm is equipped with durable arm restraints that automatically engage each time the lift is raised. When the lift is lowered, the gear arm restraints automatically disengage to provide easy positioning of the lift arms.
Taller Lift Carriages
The XPR-Series  53" tall carriages are considerably taller than most of the competitors lifts, which minimizes the stress placed on the load bearings and columns.
Maintenance-Free Load Bearings
Rather than using roller bearings that need to be constantly lubricated, every XPR-Series lift carriage uses high-tech UHMW (ultra-high molecular weight polyethylene) load bearings that never need lubrication and are designed to last the entire life of the lift.
Single-Piece Columns
We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.
Dual Direct-Drive Technology
By utilizing two, low-pressure HVLP direct-drive cylinders, the need for lifting chains or screw mechanisms has been eliminated. HVLP direct-drive technology offers better reliability, smoother operation and less maintenance. High-volume, low-pressure equates to less workload placed on the entire hydraulic system.
Single-Point Safety Release
The single point safety release and "dead man" style operation controls makes every one of our XPR-Series lifts easy to operate and safe to use.
On the Level
The dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.
Auto Shutoff
A rigid, padded safety shutoff bar automatically stops the lift should a vehicle come in contact with overhead structure.
Industrial-Grade Hydraulic Cylinders
Integrated into every XPR-Series hydraulic cylinder is a one-piece, pilot fitted, machined steel piston that is wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that eliminates any fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time.
High-Speed Hydraulics
Free-flow, high-pressure 3/8" hydraulic lines, a high-flow pump and integrated AC power-unit increase ascent and descent speed rates for enhanced productivity.
Durable Powder-Coat Finish
All XPR-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions.First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun. The powder "sticks" to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.
Features and Specs:
10,000-lb lifting capacity
Bolt-on 24" column extensions provide added overhead clearance
Expandable top beam accommodates wide or narrow configurations
Padded overhead safety shutoff bar
Drop-end arms provide a lower pad height
Dual hydraulic direct-drive cylinders
Oversized 53" tall carriage for superior strength and durability
Electric / hydraulic power system
Large, 17" x 19" A36 steel base plate
Self-lubricating dura-glide UHMW polyethylene bearing system
Single-point safety release
Safety locks in each column spaced every 3"
Automatic arm restraints
Heavy-duty 1/2" aircraft-quality equalizer cables
Oversized cable sheave diameter reduces cable fatigue
8-piece truck and van adapter set standard
Triple-telescoping arms
Versatile drop-in contact pads with stackable adapters
ETL Approved.
XPR-Single-piece columns
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 149
ABTM part number: BPAK-XPR-10S-168
*FREE SHIPPING
Customer Must Be Present At Time of Delivery.
Free shipping is to industrial areas only.
People located in rural and residential areas will be contacted concerning a .00 surcharge fee per BendPak.
Customer
MUST
have a forklift to unload the lift.
Due to the size of this lift, a lift-gate is not available
per BendPak.
Allow up to 10 business days for shipping depending on your location.
This item can only ship by ground within the Continental US.
Next Day or 2nd Day, AK & HI, & International delivery not available.
There is a 0 limited access fee for orders delivered to schools.
About Us
Based in United States, autobodytoolmart has been an eBay member since Jul 03, 2000
Feedback
We will always help you to have a 100% positive happy buying experience. Contact us if you are unhappy about any aspect of your purchase from us. We only want five star feedback from you so buy with confidence.
View Our Categories