Lenel LNL-8000-M5 Eight Door Multiplexer Module

Description

All boards in the Lenel M Series have been designed to facilitate
the migration of legacy Picture Perfect®, Facility Commander® Wnx,
or Secure Perfect® systems to Lenel’s OnGuard® system. The Lenel
M Series boards provide a one-for-one, plug compatible, OnGuard-
ready replacement for legacy CASI M5 and M3000 boards. The
migration is a straightforward process of powering down the legacy
controller, unplugging field wiring from legacy boards, inserting new
Lenel M Series boards, plugging in field wiring, and powering up new
controller which communicates to the OnGuard system.
The LNL-8000-M5 is an optional replacement for the legacy CASI
8RP board (PN 110100501). The LNL-8000-M5 enables a wide
range of new reader types to be connected via existing wiring.
This is possible by allowing standard Lenel door controllers to
communicate over existing wiring.
Typical installations will involve installation of an LNL-1300 at
each door, usually in place of existing MR/J or WIU boards. The
LNL-1300 is installed in the existing junction box, and utilizes
existing wiring both to the micro and to the reader.
Once the door has been converted with the LNL-8000-M5 and the
LNL-1300, a wide range of readers can be connected. Readers using
the SIA OSDP™ protocol provide reader supervision and tamper over
existing wiring, as well as the option of encrypted communications
using OSDP Secure Channel encryption. Wiegand protocol readers
are also supported, with a wider range of card formats and options
than supported by typical F2F readers or the WIU.
Using the LNL-8000-M5 also allows remote installation of other
standard Lenel boards, such as the LNL-1320, LNL-1100, and
LNL-1200 at up to eight separate locations.
Legacy CASI M Series Boards cannot be mixed with Lenel M Series
Boards. If converting M5 or M3000 controller to Lenel M Series, then
all boards in that controller must be converted to Lenel M Series.